Benovor 23L Desktop Ethylene Oxide Sterilizer

Benovor 23L Desktop Ethylene Oxide Sterilizer

23L Desktop Ethylene Oxide Sterilizer

Facebook
Twitter
LinkedIn

Main Features:

♦Humidification:

The analysis method of steam degradation is adopted, and the built-in steam generator makes the humidification water mist to be minimized, and achieves the purpose of comprehensive and uniform humidification and heating.

♦3.5″LCD screen:

The LCD control screen is equipped with a filter to make the current and the electric board more stable, and prolong the service life and accuracy of the control screen.

♦Power-off memory function:

Avoid the loss of equipment sterilization data due to accidents, and can automatically continue unfinished work procedures.

♦Safety protection function:

The system is set with the protection alarm function of abnormal temperature, ultra-high temperature, abnormal pressure, low vacuum rate, residual fault, phase sequence error, power shortage and equal protection in the sterilization chamber to avoid the expansion of secondary faults.

Main Parameters:

Model

 

HY-H40
Volume23L
 Sterilizing chamber material304 anti-corrosive stainless steel
 Material of outer boxCarbon steel (1.8mm thick) baking powder
 Sterilization temperature50℃ ±3℃
 Working pressure-60kpa
 Maximum pressure resistance-140kpa
 Sterilization humidity45%-75%
 Selected gasPure ethylene oxide gas
 Single dose of ethylene oxide30g
 Sterilization time0-99 hours adjustable
 Vacuum speed5 minutes to -60kpa
 Air replacementAutomatic air exchange, 5 periodic breaths at intervals of 15 minutes
 Full automatic control systemOne-click start to end, the whole process is completed automatically
 Display statusDisplay temperature, humidity, pressure, sterilization time, residual gas treatment time, number of times
 PrinterMicro-printer is used to print out every minute data during sterilization, which can be stored permanently.
 Humidity sensorThe built-in humidity sensor automatically detects the humidity in the cavity to ensure that the humidity in the cavity is not lower than 45% RH.
 Pressure sensorThe inner pressure sensor automatically detects the pressure inside the cavity to ensure the accuracy and efficiency of the pressure.

 

Additional information

Send Us Message

Customize the product for your idea.