Application:

This series of water bath sterilizers use high temperature circulating water to sterilize the medium, spray heating, sterilization and cooling of items, keep the items to be sterilized in a state of high temperature and humidity, after a period of heat preservation, so as to achieve the purpose of sterilization.

During the sterilization process, the sterilization medium circulates in the enclosed space, effectively prevent secondary pollution, back pressure is applied during the sterilization process to avoid burst bottles and bags.

The equipment has a wide temperature control range and good temperature uniformity.

Main Features:

1. Motorized door structure, removable tooth block structure, motor drive up and down.

2. Double door channel type, with pressure safety interlock, liquid program with temperature door safety interlock.

3. The sealing ring is driven by inflation pressure to achieve automatic sealing. The new high-quality high-tear-resistant silicone rubber material round hollow door sealing ring has a special coating on the surface, which is wear-resistant and smooth, with better sealing effect and longer service life. Up to 1500 cycles.

4. The main structure is a rectangular cross-section and a European-style annular reinforcing rib jacket structure. The sealing grooves are welded directly to the annular jackets at both ends (GETINGE structure).

5. Control system: imported Siemens programmable logic controller PLC and color touch screen, the whole process is automatically controlled by program, and the running process status, temperature, pressure, time and other parameters are automatically displayed.

6. Traceability system: It has a communication interface connected with the traceability system, and provides a software communication protocol connected with the traceability system.

7. Equipped with sterilization procedures such as tubular injection, plastic bottle, glass bottle, soft bag liquid, large infusion and custom procedures, as well as BD test, vacuum leak test and other test procedures.

8. Real-time printing of process data through built-in micro-dot printer, equipped with paperless recorder.

9. Intelligent maintenance system: (optional) equipped with remote monitoring and maintenance module, which can realize remote monitoring of equipment operation and remote software upgrade.

10. The inner chamber can choose an independent spray design to ensure the temperature uniformity of the sterilized items.

11. Pipeline system: stainless steel sanitary pipe, clamp connection, all welds are welded by automatic pipe welding machine;
The main control valves are imported brand German Gemi angle seat valve and Taiwan AirTAC solenoid valve, imported German SPECK direct-connected water ring vacuum pump;
French DFS large-flow pipeline pump, 60m3/h, the circulation pipeline is provided with parallel branch pipes that do not pass through the heat exchanger to ensure the circulation speed of pure water, avoid excessive temperature difference between the upper and lower sides, and ensure the uniformity of temperature;

12. Noise reduction system to reduce the noise of vacuum pump.

13. Automatic drainage device, install automatic control drainage device, automatically detect the temperature and pressure of the heat exchanger and the inner room, and automatically drain the water to ensure the accuracy of the sterilization temperature.

14. With automatic adjustment system of drainage temperature, drainage temperature ≤ 55 ℃.

15. Air filter: The filtration precision is less than or equal to 2 microns, and the sterilization rate reaches 99.97%.

Main Parameters:

Main Specifications: